webtraffic analytics

Applying Tung Oil To Wood Floor

In Wood 71 views

If it is an old floor and absorbing a lot of oil on the second day a 2 part oil to 1 part thinner will work better. How to apply tung oil.

Oil Finishes Canadian Woodworking Magazine

Is A Natural Oil Finish Right For Your Hardwood Floors Macdonald

Sustainability And Tung Oil Woodguide Org

Its ready for moderate use in 48 hours and cures in one month.

Applying tung oil to wood floor. The finish will get harder over the years. Spread the oil finish onto large areas250 square feet or lessand allow it to sit for approximately 15 minutes to soak into the floor. You can also create a mixture of apple cider vinegar white vinegar and water.

You can use the regular mineral spirit if the room has good ventilation. How to apply tung oil to wood. Apply the oil finish liberally to the floor according to label directions using a paint roller with a 38 inch nap.

Pour 1 to 2 tablespoon of the odorless mineral spirit underneath the the pad. Pool on the thinned tung oil working the oil across the floor with a sponge nylon stockings a paint roller an old cotton rag or even your gloved hands. A beginners guide pure tung oil is a drying oil thats extracted from the seed of the tung tree which is native to china and a few other asian countries.

How to clean wood floors with tung oil finish. Problems with tung oil on hardwood floors. I applied more coats until the oil was not penetrating into the wood after letting it sit.

The oil has been used for centuries as a water resistant finish for boats and other wooden objects as well as to finish stone. Allow the oil to soak into the surface for an hour then sand lightly to promote adhesion. There are a few downsides to tung oil.

Possibly 1 part pure tung oil to 2 parts thinner. If the wood floor is very dense and non absorbent you may find a thinner ratio is required. I skip a day and scuff again and apply the third coat.

I apply one thin coat and by the next afternoon it is dry enough to be scuffed and the second coat brushed on. Lastly while all finishes can be damaged with tung oil any damage is easily repaired. As an optional step you can thin the first coat of tung oil by 50 oil to 50 mineral spirits.

Work the oil into the corners using a toothbrush if necessary to reach the crannies. After sanding and cleaning the wood surface to remove any previous finish spread the oil along the grain pattern using a clean lint free rag. Take the cleaning pad and place it on your hardwood.

To get the maximum protection apply 3 coats of full strength tung oil but you can always apply more. Tung oil has been used on boat decks for years and is now becoming a popular wood floor finish. Wait a 3 7 days to apply followup coats.

Step By Step Applying Oil Finish On Wood Floors Wood Floor

How To Apply Pure Tung Oil To Wood The Right Way Youtube

Wood Finishing How To Hand Rubbed Tung Oil Varnish On Walnut Youtube

Tags: #applying tung oil to wood floor

Applying Tung Oil To Wood Floor
Applying Tung Oil To Wood Floor
Pool on the thinned tung oil working
Applying Tung Oil To Wood
Applying Tung Oil To Wood
One part pure tung oil mixed to
Applying Tung Oil To Wood
Applying Tung Oil To Wood
Minwax tung oil finish creates a remarkably
Must read×

Top